This is my first of my monthly “big” – post (read more about the changes I will make this year).

I had this lying around for some time (made it before Christmas), but didn’t take the time to finish it.
For the first time I had a WIP test builder (Jason Bolt) and that helped a lot.
Especially because I had some pressure to finish it!!

And as promised it will be down-loadable; I present:

Brummble

Brummble is a papertoy tribute to the awesome vinyl from ThreeA: Heavy Bramble.
I wanted to see how fast I could “papertoy” a vinyl (about 3 nights (3*4hours) and some extra hours for ‘bugfixing some ‘lite’ instructions and photos). The instructions are very minimal, so some it’s not a beginners project. You will need 5 pages, my advice is to use 120/160 gram paper (heavier than the usual printing-/copy-paper). It will take about 4 hours to cut out and build.

Blank template

Not a print this time? No I don’t think it needs more, but you may always surprise me with a custom!

5 pages

Yes it’s not a small papertoy, but the result will be very close to the original!
and show me/the world the pictures!!

The .ZIP file contains a .PDF
(You can use freeware like FilZip or 7zip to extract a .ZIP-file and read a .PDF with Acrobat or Foxit)

It’s been a while … haven’t posted anything regular in a… year.
That would have been the year 2011: the year I became for the first time a dad.

So here a little update (for the one person who still reads this blog).

2011 and a little bit before that

I had big plans; I wanted to show everybody that my live didn’t change when I got a kid…
Boy…was I mistaken.
Don’t get me wrong: this has been the best year of my live!!
But the things I wanted to do this year, the plans I made… nothing of that happened.
My daughter happened! and everything else followed HER plans.

I wanted to be a part of her live and not only look after her in the weekends.
My girlfriend and I both decided to have a 4 days work week so my daughter only has to goes to the daycare center for 3 days.
The employer I was working for at that time didn’t want me to work 4 days. I tried to use a dutch-law: they said they would take me to court, etc, etc.
I don’t want to make this post about my former employer (if you want to know more about this story, just ask), so I decide that it would be best for the both of us to find another job (1.5 month before my daughter was born…. I know: I’m still bitter about that).
But here is the good news (remember: the best year of my live) I found a great new job at noprotocol.nl!!!
I could work there for 4 days, they are very flexible and an awesome group of talented people.
AND I didn’t miss anything daughter-related stuff, which I can recommend every dad to do: have a day alone with you kid.

So the first 6 month of the year 2011 is mostly about being a dad (boring stuff for people who don’t have kids, nothing to explain to the people who have them).

Professionally (during the day I’m a Flash Designer/Developer) I learned about Robotlegs, AS3-navigator, LoaderMax, etc. Had some interesting talks with the people of “the bigger boat” (group of freelancers). AND I can do the job in 4 days (sometimes with some creative time-management from my employer and myself) which I knew would be possible, but conformation is alway nice.
In the next 6 months of 2011 I started to think about what I wanted. What makes me happy, what is making me happy right now and what will make me happy in the future. I miss the feeling I had when I started to work as a junior designer: wanting to learn EVERYTHING to become a senior. But now I am a senior… what’s next? Do I want to be a programmer for the rest of my live? Questions that are not answered yet.

I’m also a papertoy designer (something I do at night). This year was not a good year for papertoys: I needed my sleep!
I have done 1 exhibition in Amsterdam and I did an exhibit at Sneakerness Amsterdam (also the first time that I sold papertoys).
Both exhibition was done the rest of the dutch papertoy designers (3eyedbear, Marshall Alexander, Dolly Oblong) and one german papertoy designer (Nick Knite).
For these events I made 2 new papertoys, but they will not be downloadable. Nick Knite and myself wanted to organize a papertoy calendar with papertoy designers we both like… sadly I had to cancel that: no time to start/finish it
All and all not very productive year.

2012

My live (and this blog) is more than just one specialty. So here a short list:

Flash / Development

This is my job, this is how I make a living… and Flash is Dead! (again). I’m not worried so I will keep learning even more about that subject. But I need more! I have made a small CMS in 4 weeks in PHP (what an ugly language is that!) but that didn’t excited me much.
So I want to learn haXe! I’m quite excited about this language so I will be writing about that soon.
I would love to lead a team… or join a group of flash/geek-superstars (whatever moves me forward)
I want to finish what I have started in 2011:

• finalize (and improve) my project setup.
• automate the stuff that I have to do over-and-over-again

Find out how a senior finds his “what’s next”
Start having coffee-meeting with the industry tech-directors/tech-team leaders/etc to answer BIG question
Will be joining the after-work-drink-on-friday with my colleagues more often (once a month)

Urban Papercraft / papertoy

I really have no plans for papertoys: I used to do this to relax, but last year I relaxed by sleeping.
There is still two books I wanted to write…. but I can’t promise that it will be finished this year.
You can always ask me for a workshop or lecture about papertoys: just let me know!

The graffiti inspired papertoys I do will not be downloadable: that will be my art and art can’t be given away
So what can the fans download? I have created a toy based upon 3A vinyl toy: Brummble. That will be released very soon.
And more perhaps? Not really a plan for that but sometimes I get a tickle and that needs to be scratched… and the product of that scratching (now this metaphor is getting dirty) will be downloadable.
Can you ask me for exhibitions? Yes, please do. I like the idea that my work is art and not only a (paper)-toy.
That is also the reason that I have titled this paragraph “Urban”: urban-art, urban-toy, urban-paper that’s what I will be making.
Can you ask me for a papertoy book? Yes, please do. I have worked on two books with much pleasure and would be honored to asked for another.
Can you ask me for a custom? Yes you can… but time is very precious right now. So your project must be VERY interesting.
I have promised to finish a custom Zealot Guard from Abz, and that is what I will do. Why do this custom? This is a VERY exciting project by a (perhaps the only) female papertoy designer.
There are some plans to visit Germany for some workshops, but other than that I have no idea.
2012 will reveal itself to me as it goes towards 2013

Blog

Now I have some energy back in the evening I will be writing again on this blog, but not as often as I did before 2011. I used to write every week. That will change to once a month: a ‘big’ post. The ‘big’ post will be a tutorial or something else that needs more explaining. That will mean that there will be at least 12 more posts. Between these ‘big’ posts there will be some papertoy related images (minimal writing).
I will be writing about haXe, so that will be exciting (for programmers). I think I can be of some help making haXe more accessible for the ‘normal’ programmer.

That is not the only way to follow me: I have a twitter account. here I talk about everything that interests me (design/development/sneakers/games/video/whatever)

Misc

When my daughter was born I quit the gym (it was too expensive). I wanted to find something cheaper… It turned out to be very cheap: I didn’t join a gym but I also didn’t do something else. This year I will be joining a gym…. and to be very specific: I want to try Kickboxing!
Another thing that I will do, or stop doing… Is doing things for free. And that goes also for friends and family; they will pay (not necessarily with money, but for free doesn’t work for me anymore)

I’m looking forward to 2012!

(popsetpaper.com, Happy Colours’ Attack)

But for I can’t finish the papertoy in time (my live is changed a lot!)
(participate)

Damn I just couldn’t get more time in the design/build… I wanted to compete but there are more important things to do…

I could be sad, but I’m not, so instead of winning a contest
Ishare the end result with you (this is my blog so why not):

I introduce to you:

Squeezzrr

a C-Myk papertoy
(and my first Shin Tanaka custom)

Squeezzrr front-shot

Squeezzrr side-shot

Hope you like it.

Update #1: I have added Squeezzrr also to the gallery of Pop’set. It will be visible in 48 hours . To bad that there is no like button anymore

Update #2: I was missing the possibility to “like” this! So now you can do that here: like me on facebook. So like me alot

So I started to look for: light/lightweight/nano/simple CMS (no database/flat file storage)
This is the list I compared it to:
Very important: free (and not a pro-$$-account), no database/flat file storage, lightweight, easy to install, WYSIWYG editors, PHP
Important: easy to use/beautiful , normal data editing, file manager, easy to create templates/CSS for this system
Nice to have: gallery, no need for multiple users (no a must), no need for backup, no need for multiple languages (english is fine), contact form, html-editor (export to files)

I went a little overboard with the search for the ideal CMS for me.
After reviewing them I gave them a grade from 1->10 and to make it even easier: the highest grade is the one I choose for this project.
So here a little overview to make it somewhat easier to read about my findings:

1. LotusCMS –> 9.5
2. razorCMS –> 9
3. gpEasy –> 9-
4. GetSimple –> 8
5. CMSimple –> 8-
6. Pluck –> 7
7. phpsqlitecms –> 7-
8. SkyBlueCanvas –> 6.5
9. NanoCMS –> 6+
10. Nanomus –> 6
11. opensolution (Quick.Cms) –> 6-
12. LightNEasy –> 5
13. onefilecms –> 4

LotusCMS

It brings to the forefront design and design integration into one of the most neglected CMS niches – Databaseless Web-Design and Development. LotusCMS is free and more than free, it is licensed under the General Public Licence under which you may copy, change and redistribute this software to suit your needs!

Features:

• A plugin system using the concept of observable classes.
• A lightweight core, into which everything else is plugged in.
• Multiple users and user roles.
• WYSIWYG content editor.
• A blogging system.
• Improved general usability and design.
• An advanced speed caching system for standard pages, with up to a 3 times average speed increase for server-side processing.
• SEO settings (Search Engine Optimisation), if your installed template supports it.
• A back-up system.
• Very beautiful
• User friendly
• multiple users but 2 roles
• Ugly dynamic URLs
• easy install (check if server is ready, self config with deletion from install file!)
• Install 2.9 mb

I like it a lot and I give it a 9,5

razorCMS

With the further evolution of razorCMS, our goal for the next milestone release is to offer true choice, by offering a more simple intuitive approach, choice of mySQL or flat file storage, and pure razorCMS code putting razorCMS on the map as an original CMS solution with no connection to other CMS solutions.

Features:

• really small, and works out of the box.
• You need to install ‘blade’-plugins to add more functionality
• Flat File design, no database required
• Simple, fast and security conscious installer
• Small and fast footprint
• Modular framework
• Support for multilingual translations
• Multiple infobar content displayed on single page
• External links in link menus
• Easily modified
• Easily extendable via blade pack add-on interface
• Multi level menus
• Security check for file permissions
• Full file manager
• 3 user accounts with varying levels of access (good for handing over to clients)
• Simple backup manager
• Automatic invalid login check, blocks invalid logins by IP address after 8 attempts
• Improved security
• Multiple theme control
• Maintenance Mode, keeping your site offline to users but online to you, for changes
• easy install (check if server is ready, self config with deletion from install file!)
• possible to work on pages but not published yet

Nice set op plugins: possible to use for posting news, gallery, editor of you choise, nice url, etc

A lot of lite CMS use this: the name of the content is called ‘sidebar’ (you can rename it in this cms!), which made me think
why not call it ‘content’?

It’s beautiful and easy to use. I installed some extra’s to make it even better.
Install: 503 KB (default install) >> need for wysiwig editor and theme
Install: 1.9 mb with install (tinymc / gallery / theme)

I like it a lot and I give it a 9.

gpEasy

gpEasy is a lightweight CMS (built without the use of a database) which helps us reach our goal of making it fast and easy to use right down to the installation. Once installed, you’ll find an intuitive interface that let’s you edit your entire site in WYSIWYG fashion.

Features:

• WYSIWYG Editor (CKEditor)
• Galleries (ColorBox with some modifications)
• SEO Friendly Links
• Free and Open Source (GPL)
• Runs on PHP
• File Upload Manager
• Editable Theme Content
• Deleted File Trash Can
• Multiple User Administration
• Works in Safe Mode with FTP Functions
• Flat File Storage
• Fast Page Loading
• Fast and Easy Installation
• reCaptcha for Contact Form
• HTML Tidy (when available)
• themes
• gallery
• plugins
• easy install (check if server is ready, self config)
• Install: 4.2mb

I like it and I give it a 9-

GetSimple

GetSimple is an XML based lite Content Management System. To go along with its best-in-class user interface, we have loaded it with features that every website needs, but with nothing it doesn’t. GetSimple is truly the simplest way to manage a small-business website.

Features:

• No database
• XML Based
• You can “Undo” Almost Everything
• Easy to Learn UI
• Simple Installation
• Simple Theme Customization
• Designed For the Small-Site Market
• plugin
• templates
• easy install (check if server is ready, self config with deletion from install file!)
• Install: 2.6mb

strange the need to set a ‘Website Base URL’

I like it: 8

CMSimple

it is small – simple – smart!
Features:

• Easy installation
• The CMS script is less than 100 KB
• Template driven layout using a css script
• The contents of the site is stored in a single HTML-file
• Many languages available (both for the user and for site maintenance)
• Written in PHP – it runs on Linux/Apache servers, or on Win32 with Apache or IIS
• Inbuilt WYSIWYG editor (both on IE and Mozilla) – or other alternative editors
• Uploading of images and files
• Link validation
• Search function
• Print version option
• User downloads from their HTML content file
• Simple mailform included
• Easy setup of multi language sites
• PHP-scripting may be included within the content (named CMSimple Scripting)
• Integration with 3rd party scripts possible (using CMSimple scripting
• Online editing of system configuration
• wwwaut login available
• Automatic backup on logout
• Documentation
• Special download folder
• Easy install (but it uses the default settings)
• Install: 117kb

it took me a while to find the login: add &login (index.php?welcom&login) or ?login (index.php?login)
It’s not the most beautiful cms out there, but it’s very complete
don’t know how useful the split on H-tags is in submenu’s
It’s quite intuitive which is unexpected!

I like it and I give it a 8-

Pluck

Pluck is packed with some nice features, from which we’ve listed the most important ones on this page. To try everything live, take a look at our demo.
Features:

• create an unlimited amount of pages
• create your own blog
• create an album to show images or photos to your visitors
• include a contact form in your page(s)
• easy-to-use theming system
• single user
• Install 3mb

I like it: 7

phpsqlitecms

phpSQLiteCMS is good if you want to quickly set up a small website without needing to spend a lot of time studying, installing and configuring (as SQLite is file-based, it just runs “out of the box”). But note that it is no large-scale content management system – it’s a tiny and simple one!

Features:

• Simple and lightweight
• Runs out of the box (no database setup required)
• Optional caching to save server performance
• Supports news
• overview and
• commentable pages
• photo galleries
• search function
• RSS feeds and
• XML sitemaps
• need some explaining, very complete, quite technical
• Install 1.2 mb

It’s an easy instal but you need to use the default inlog data–>user: admin // pass: admin

The default install is also the documentation.
Which means that you need to remove a lot of pages before you can start clean

Good but not for this project: 7-

SkyBlueCanvas

SkyBlueCanvas is an easy-to-use Web Content Management System, that makes it simple to keep the content of your site fresh. You simply upload the software to your web server, and you are ready to start adding text and pictures to your website.

Features:

• Easy-to-use
• Easy-to-install
• XML Data Storage (no database required)
• Extensible
• Flexible & Powerful Plugin API
• Skinnable
• Small in size (3.5MB) <-- hmmmm I got 5MB
• Valid XHTML 1.0 Strict output
• Search Engine Friendly URLs (requires mod_rewrite)
• Customizable Meta Tags (globally or by page)
• Built-in RSS feed creation of pages, articles and news items
• easy install (check if server is ready, self config with deletion from install file!)
• 1 user
• template editor
• Install: 5mb

some advertisement in install
strange question about location of website ?? (yes, I want to install it here)
user interface could be better, but that probably because the developer wants to make some money out of it (can’t blame em)

Not my choise: I give it a 6.5

nanoCMS

nanoCMS created by Kalyan Chakravarthy in 2007 is a php open source, gpl licensed flat file content management system (CMS). It does not use a MySQL database and is ideal for small websites. It is a very small CMS package (hence the nano part). Doesn’t take long to setup and is very simple to create pages and edit content. As it is small and doesn’t use a mysql database….. it’s fast, very fast.

Features:

• one user
• one template
• WYSIWYG editor
• Install: 2,2 mb

Easy install but not configurable at first // username: admin // password: ch4ng3th1s

very nice simple, but kinda heavy for something that’s called nano…
Categories are places on the page: sidebar == content // top-navigation == navigation

It would take me some modification to get it to work how I want it: so not for me but certainly not bad: 6+ (a little more then Nanomus)

Nanomus

Nanomus is one of the smallest, fastest and more simple free Content management Systems under GPL GNU.

Features:

• Very small : the complete content management system is less than 100kb, PHP core is less 23 kb
• Very simple : really simple to install and really easy to manage it.
• Nanomus store all datas in secure PHP files, no database is required.
• With Nanomus you can get a real small dynamic website
• Really fast: with nanomus your website is really light and fast !
• an unlimited number of pages
• backup file system
• deactive page system
• dynamic menu
• css template
• include a filemanager
• Nanomus is a free content management system, open source, really light, fast and secure.
• No database required.
• Nanomus isn’t multi users, only one account is possible.
• Nanomus backup, if you want, all the olders page version.
• Install: 153kb

It’s an easy instal but you need to use the default inlog data–>user: admin // pass: admin
Meta is perhaps not so obvious for a unexperienced user
Admin is not ugly, but to call it beautiful is taking it to far.

Nice but to ‘unpleasant’ design: 6

opensolution (Quick.Cms)

Features:

• Pages and subpages management
• Images and files management
• Languages management
• Configuration
• Pages and subpages view
• Pages print option
• Images view by Lightbox
• Change language option

Nice cms, but there is a paid model… And I feel that they are holding out on me
If you would need a gallery/contact form, you need the paid-version-extra
Install: 844kb
not for me: 6-

LightNEasy

LightNEasy generates a complete set of HTML/PHP webpages and recreates them whenever you make any changes. Your website will always be updated and easy to edit. No broken links to worry about.

Features:

• not really nicely designed
• kinda heavy
• lots of templates pre-installed
• admin is too much for my taste
• template driven
• website builder
• and cms
• language
• gallery
• Install: 4,7 mb

not for me: 5

onefilecms

Features:

• Validating, semantic, and commented markup. Tested in FF, Safari, and IE7/IE8.
• Small footprint (24 kb)
• Possibly the easiest installation process ever
• All the basic features of an FTP application like renaming, deleting, copying, and uploading
• (Of course, for more complex processes like batch renaming or mass uploads/deletions, you’re going to want to break out an actual FTP program.)
• Gracefully degrading CSS and Javascript
• 100% re-brandable with title/footer text stored in variables and a modifiable filename
• Externally hosted CSS and images for smaller file size
• (But you can switch it out to your own stylesheet if you need to!)
• Smart alert if you try to leave without saving your edits
• very small but extremely technical (you need to know about programming)
• Install 78 kb (with example site)

It’s not for this project, I think it’s a great starting point for creating your own CMS, but in this case I’ll give it a 4.

Note

Lite CMS I also tested, but didn’t fit one (but probably more) feature that I described above:
autocms(can’t get it to work), editeasy (can’t get it to work), whitecrane (difficult to use, BBCode), le.cms (couldn’t get it to work)
This doesn’t mean they are bad; they just don’t fit my needs.

My advice to all cms builders: create a minimal template series so designers have a starting point for their designs
simple stuff: header, horizontal navigation, vertical navigation, content, sidebar

I have written about it, showed you images/photos and now there is a special day for it!

Papertoy Monsters:

Make Your Very Own Amazing Papertoys!

The papertoy book I have designed two monsters for published by Workman Publishing (strangly enough you can’t buy the book at Workman anymore).
If you want to buy the book visit amazon.com and buy a couple of copies!!!.

Here a little quote by Workman:

A breakthrough paper-folding book for kids—paper airplanes meet Origami meets Pokemon. Papertoys, the Internet phenomenon that’s hot among graphic designers and illustrators around the world, now comes to kids in the coolest new book. Created and curated by Brian Castleforte, a graphic designer and papertoy pioneer who rounded up 25 of the hottest papertoy designers from around the world (Indonesia, Japan, Australia, Italy, Croatia, Chile, even Jackson, Tennessee), Papertoy Monsters offers 50 fiendishly original die-cut designs that are ready to pop out, fold, and glue. The book interleaves card stock with paper stock for a unique craft package; the graphics are colorful and hip, combining the edginess of anime with the goofy fun of Uglydolls and other collectibles. Plus each character comes with its own back-story.

I’m proud to present the monsters I have designed:
Scorpion Robot

and
Squidbeak (formely know as ‘Octobeak’)

You won’t find a lot of images of these Monster papertoys around on the Internet, I’m not sure but I think my paper models are rated advanced.
Although you can see a part of the page where Squidbeak is at boingboing.net (check the first page of the book you see).

Here a promo of the author Castleforte:

The Papertoy Monster book has also a site:papertoymonsters.tumblr.com/ so check that out for more pictures of the monsters. And follow it with twitter: twitter.com/PapertoyMonster

Here all the other monsters that you can build:

Trying to build the ultimate build.xml in ANT: debug/production zip ftp version … etc: will save a lot of keystrokes in FDT4

source: http://twitter.com/MatthijsKamstra/statuses/25194997777

All the information about the ultimate build.xml can be found on the internet, so I will post the links and you can figure it out for yourself.

I used the build.xml made by Jankees van Woezik (Base 42) as the base of my ultimate ANT build file. You can read about it and download here: My workflow with ANT and FDT.

Because we work a little bit different I had to do some modifications (for example: I work with 2 swf: preloader.swf and main.swf and work on PC). I created a list of stuff that I wanted to do with ANT and behind the “wish” you find a link to the site I found the solution for the problem:

1. base ant script >> http://blog.base42.nl/2009/12/11/my-workflow-with-ant-and-fdt/
2. inspiration >> http://code.google.com/p/sekati/source/browse/trunk/build.xml
3. install ftp protocol in fdt/eclips >> http://www.rumblingskies.com/blog/?p=75
4. update version ant script >> http://github.com/base42/projectcreator/blob/master/original/flash/builders/ant/updateVersionFile.xml
5. another update ant script >> http://www.sephiroth.it/weblog/archives/2010/01/update_your_app_version_using_ant_bui.php
6. update Firefox (only works on OSX) >> http://epologee.com/blog/2009/focus-and-reload-pages-in-firefox-with-ant/
7. html wrapper >> http://fdt.powerflasher.com/blog/?p=1392
8. create folders >> http://code.google.com/p/sekati/source/browse/trunk/build.xml

Something like this needs some time to find its place in my workflow, and will be changed a lot. That is the reason why I’m not posting my ant file… not because it’s ugly or a secret… but because I need to refine it. 

Oh… I also have a small todo list (perhaps you could call it a nice-to-have-list)

• count lines of code >> http://cloc.sourceforge.net/
• zip files >> http://www.funky-monkey.nl/blog/2010/09/22/copy-files-to-a-network-share-with-ant-and-fdt/
• asdoc >> http://code.google.com/p/sekati/source/browse/trunk/build.xml
• swc >> http://code.google.com/p/sekati/source/browse/trunk/build.xml

As you can see, these are the thing that I don’t need a lot, but perhaps in the nearby future…

FTP (File transfer protocol)

Ant doesn’t have the FTP protocols default installed so you need to update FDT4/Eclipse.
You can find the explanation here: http://www.rumblingskies.com/blog/?p=75

You probably can add the zips you downloaded there, I extracted the two files and that worked for me. I did this in FDT4 and all I got was an alert about “The specified Ant runtime classpath does not include a tools.jar library…..” which I ignored (and without any problem).

After the installment of the two .JAR files you need an ANT script to get thing started which I just copied from the previous link:
[as light="true" wraplines="true"]
<target name="ftp_upload" description="uploads files through ftp">
<echo message="uploading files" />
<ftp server="123.456.78.90"
port="21"
remotedir="/www/ant_upload_test"
userid="my_user_id"
password="my_password"
passive="no"
depends="yes"
binary="yes">
<fileset dir="../bin" />
</ftp>
</target>[/as]

Update version

It’s a combination of writing a build.txt file and a Version.as file.
See what Jankees van Woezik did and I use the script from Sephiroth to have a building number that adds 1.

Firefox refresh

this feature is awesome in combination with ftp, so here the one who found the how: Eric Paul (epologee). Read more about it here: focus-and-reload-pages-in-firefox-with-ant

So downloaded the file, installed the firefox extension and gave it a run:
[as light="true" wraplines="true"]
<target name="focus Firefox and reload page">Execute failed: java.io.IOException: Cannot run program "open" (in directory "C:\foo\bar\test"): CreateProcess error=2, Het systeem kan het opgegeven bestand niet vinden
[/as]

After some googling, I found that it’s a OSX command that doesn’t work on Windows:

[as highlight="1" light="true" wraplines="true"]
<target name="focus Firefox and reload page">
<exec executable="open">
<arg line="-a Firefox" />
</exec>
<exec executable="flash/tools/fresno/fresno">
<arg line="-j ‘content.location.reload()’" />
</exec>
</target>[/as]

I haven’t found a solution that refreshes the page like Fresno does on Windows.
So the only thing I can think of is:

[as light="true" wraplines="true"]
<target name="Launch in Firefox (reload)">
<echo>Launch in Firefox (not really a reload)</echo>
<exec executable="H:/Program Files/Mozilla Firefox/firefox.exe" spawn="yes">
<arg line="${flashproject.preview.url}" />
</exec>
</target>
[/as]

Html wrapper

I changed the file a little bit (removed the history) not really difficult.

Folders

You get the idea….

(reminder for myself: http://fdt.powerflasher.de/docs/FDT_Ant_Tasks)

Castleforte: here is a sneak peak of all 50 monsters from my new, soon to be released book, “50 papertoy monsters”. thanks to workman publishing for this wonderful, promotional poster. enjoy!

This is a freaking awesome book!!! what a beautifull set of papertoys

My monsters are “Squidbeak” (third row, first one) and “Scorpion Robot” (fourth row, third papertoy).

Preorder at Amazon

I thought about it…. and I think he’s right!
So here a little progress: based upon a MAC 10 here is my papertoy version MacTen.

Original “blueprint” of the MAC10

and my first build (WIP)

And after my first build, I realize that there needs to be a lot of changes to make it as fun as the Revolvrr.
So back to the drawing board, and make it more fun

The model is not ready for download, but let me know how bad you want it (make a comment!!!) and you will be the first (!) to know.
Oh and when your busy commenting, tel me also what should be part (weapons like a Rambo knife, grenade, ….) of the “Urban protection series”!

But this one is just so you don’t forget me:

Revolvrr is a papertoy that I made as a part of an other papertoy.

Nick Knite and Dolly Oblong advised me to share it with you. So here it is: it’s only a blank version because it just doesn’t need more.

The .ZIP file contains a .PDF
(You can use freeware like FilZip or 7zip to extract a .ZIP-file and read a .PDF with Acrobat or Foxit)

There was some room left on the template so I made a bullet for the Revolvrr

70′s Lurrv Gun – Methuup da Funky One custom

Water Pistol ‘Revolver’ – Jason Bolt custom

Revolvrr custom – Anonymous

Revolvrr custom – George McKnight

How to do this?

The first you need is a piece of paper with a print/pattern on it. Try Google for a pattern.
You can buy paper with a print on it but you can also use a page from a comic/magazine/flyer.
After that you just print the blank template on it.

Oh no!!!

The first papertoy suicide? A sad way to end your birthday… how will this end…
And remember: Revolvrr’s don’t kill people, scissors do!

(No papertoy fan(s) where hurt during this photo session)

It looks kinda ugly, I thought it would be better then posting nothing for weeks in a row.. but it’s not